Confined Space Rescue Tripod and Winch Equipment

Fireman fire safety fire rescue tripod with CE standard Brief: * Item name: rescue tripod * Material is High strength Aluminum * 134-214cm working scope * 134cm Closed Height Specifications: * Max. Opening Distance of Blades > 28mm * Rated Working pressure :63Mpa * High quality and using long...

Product Details

Confined Space Rescue Tripod and Winch Equipment

Brief:
* Item name: rescue tripod
* Material is High strength Aluminum
* 134-214cm  working scope
* 134cm Closed Height

Specifications:
* Max. Opening Distance of Blades > 28mm
* Rated Working pressure :63Mpa
* High quality and using long time


Relative datas:

Technical Specification




           Rescue
           Tripod

Model

MT-FT1

Material

High strength Aluminum

Operating Load

300Kg

Breaking Force

22KN(Steel wire Rope)

Working Scope

134-214cm

Closed Height

134cm

Extend Height

214cm

Dimension for reference

173*39*36cm

Weight

16.5Kg

Winch

Length of Wire

25m

Operating Load

200Kg

Breaking Force

1800KN


Working Principle
MT-FT1 rescue tripod is the rescue tool specialized to used to prevent dropping from high place.
It has passed the EN795 inspection. It confirm to the B level standard.
It only can one person use.


Main Structure
The structure of MT-FT1 rescue tripod is shown as Pic #1.

24.png

Pic # 1. Structure of MT-FT1 Rescue Tripod
* The top head
* Eyebolt
* Fastening handle
* Pulley
* Outer tube of the frame
* Handle control capstan
* Positioning pin
* Hook
* Branch sleeve
* Chain-guard
* Working height: extension height: 214cm  Closed height: 134cm


Basic Configuration
* The top head: High strength Aluminum.
* Eyebolt: one is in the center, one is in the back, it's convenient to install equipment.
* Frame: extension type frame equipped with propel rod, it can push the frame up and down. The bottom of the frame equipped steel support. Effective guarantee the equipment can use on the uneven ground.
* Handle control capstan: 30 meters steel wire.
* Chain: Safety chain can effectively reduce the horizontal force,prevent frame slide.


Specification

Technical Data of Rescue Tripod

Model

MT-FT1

Material

High strength aluminum material

Operating load

200kg

Max. Prevent breaking force

22KN (Steel Wire Rope)

Height scope

134-214cm

Working height

Closed height

134cm

Extension height

214cm

Packing Dimension

153*39*39cm

Weight

36kg

Technical Data of Rescue Tripod

Model

MT-FT1

Operating Process

Fix The Tripod
* Let the tripod keep flatting on the smooth and hard ground. Open the frame, use the positing pin to fix the length of tripod.

Set up the tripod, and fixed by bolt-locking.
25.png

Confirm Branch sleeve is steedy. Adjust telescopic frame to ensure that the three fulcrum in the same plane. To install the chain and lock the chain by the connection button.
Notes: don't stumble by the chain when install and use the chain.
23.png

Inspect if the positing pin is firm and if the position is right.

Confirm the chain install the bottom of the frame, and let it effectively prevent slipping caused by the horizontal force.

26.png

Pack up The Tripod
* Press the lever connect with the lock, and contraction the frame.
* Put the tripod lie flat on the surface, remove the positioning pin, then pack up the frame.
* The rescue tripod must retract immediately after using, and as the manufacture request to inspect the equipment.
* Can be inspected by the person:
----Manufacture.
----The person who are recommend by the manufacture.
----The company which is recommend by the manufacture.
This inspection is valid before next inspection when it needed.

Inquiry